Drum core drill

At present, there are two common: tube cutter drill (for medium hard rock and gravel), core drill bits tube (for hard rock and large boulders). In barrel coring drill bit in two categories, and with and without coring device to take points of core devices, depending on the difficulty of coring. Because cone core drill is mainly used for hard rock drilling and drill the ring area, if the conditions can also pass on part in the installation of reverse circulation core drill bit to improve drilling efficiency. 4, belled pile diameter drill bit does not increase without increasing deep foundation piles, in order to improve the bearing capacity of single pile, the design department is often achieved through the pedestal pile, rotary drilling rig construction is expanding bottom without any changes can be construction just choose belled drill can be. Belled drill used to mechanically based, such drills are relatively simple to use and maintain, there is the open and under the open, the opening of the four-link mechanism is generally used for soil, strong winds, weathered even hard rock formations. Due to non-circulation drilling Rotary core drills bits, completion of expansion after the end of the barrel with slag slag can be.

The classification of core drilling bits

Current common classification auger core drilling bits common helical auger core drilling bits, rotary bucket, drum core drilling bits, belled core drilling bits, impact core drilling bits, red cone core drilling bits and hydraulic grab grab, following a brief introduction by the class. 1,1 auger (1) cone: Double double spiral, suitable for hard rock. Double single screw for weathered bedrock, gravel, soil, etc. containing ice. Equipped with a variety of the above core drilling bits cutter through tooth pitch, helix angle of the change can be derived from the many types of core drilling bitss. (2) straight auger: a, bucket teeth straight Lo: Double double spiral, suitable for sand, cement poor small-diameter gravel; single-headed screw, suitable for sand, soil; single head single screw, suitable for large diameter difference cemented gravel, clay soil and hard clay. b, picks straight spiral: a double spiral, three and four-Lo Lo, then apply hard rock or gravel. 1,2 auger core drilling bits bucket teeth can be divided by the installed cutter core drilling bits bucket and bucket teeth core drilling bits bucket; the floor can be divided according to the number of double bottom bucket and single bottom bucket; can be divided according to the number of open double doors and fighting single door bucket; can be divided according to taper cone barrel barrel barrel core drill bit bucket and core drilling bits straight fight; shape can be divided according to the lower plate and flat-bottom pot core drilling bits bucket core drilling bits bucket. Above structure combined with each other, plus whether vented, change door mechanism can be combined dozens of auger core drilling bits bucket. Generally applicable double bottom formation core drilling bits bucket wide range, single bottom applies only to tack a strong soil, two-door core drilling bits formations suitable for a wide range of fighting, fighting only for single door core drills bit large diameter and pebbles hard clay.